Shortcuts
|
 |
PheeNet WAP-854GP
|
| details: | Industrial Class 802.11g Wireless Access Point |
| hardware type: | Wireless Access Point |
| date added: | 2011-09-21 |
| updated: | 2020-03-15 |
WAP-854GP is compliant with the latest wireless industrial security standards. Its Wireless Distribution System (WDS) feature allows for flexible extension of wireless coverage.
The dual LAN ports, which can receive Power over Ethernet (PoE) and back up each other by failover function, give WAP-854GP reliable connectivity. Its metal case is IP50 compliant; that meansWAP-854GP is well suited to the WLAN deployment in industrial environments.
WAP-854GP's easy-to-use web-based administrative interface make the configuration task and client management simple and straightforward. In addition, CLI and SNMP management interfaces are also supported by WAP-854GP.
The built-in software interfaces of WAP-854GP has allow for communicating with other types of network management servers.When managed by backend controlling gateway, WAP-854GP can further provide enhanced values in a well managed WLAN solution.
| WAP-854GP Features |
| General
|
| Availability: |
discontinued
|
| LAN / WAN Connectivity
|
| WAN ports: |
0
|
| LAN ports: |
2 |
| LAN ports type: |
10/100 Base-TX (RJ-45)
|
| LAN ports auto cross-over: |
 |
| Router
|
| DHCP client: |
|
| Routing Protocols: |
VLAN tagging (802.1q)
|
| Wireless
|
| Maximum Wireless Speed: |
54 Mbps
|
| WiFi standards supported: |
802.11b (Wi-Fi 1)
802.11g (Wi-Fi 3)
|
| Wifi security/authentication: |
WEP
WPA (TKIP)
WPA2 (AES)
802.1X (EAP-MD5/TLS/TTLS/PEAP)
Wireless MAC Address filtering
SSID Broadcast disable
|
| WiFi modes: |
Access point
Wireless bridge (PtP)
Repeater mode
|
| external antenna(s): |
2 |
| ext antenna(s) removable ?: |
|
| Antenna connector: |
RP-SMA (Reverse SMA)
|
| Antenna gain: |
5 dBi |
| Transmit Power: |
+16 dBm |
| Receiver Sensitivity: |
-68 dBm |
| Multiple SSID: |
|
| WDS compatible: |
|
| WMM (QoS): |
|
| Device Management
|
| Default IP address: |
192.168.1.1 |
| Default admin username: |
admin |
| Default admin password: |
admin |
| Administration: |
Web-based (LAN)
Telnet / CLI
|
| Firmware upgradeable: |
|
| Configuration backup/restore: |
|
| Event log: |
|
| Misc hardware info
|
| Chipset: |
Atheros AR2317 |
| RAM: |
16 Mb |
| Flash Memory: |
4 Mb |
| SNMP support: |
SNMP v.2
|
| NTP client: |
|
| Power over Ethernet (PoE): |
|
| Links
|
| Product page: |
http://www.pheenet.com.tw/ |
Please use the Add Comment function below to review devices you have used (please be descriptive).
If you find an error in our database, or have additional information about the product,
please
|
